If you don’t have a mobile device at hand, you can synchronize Sync E units with each other via the included 3.5 mm cable through the mini jack port as well.
- Start one Tentacle in Green Mode (master) and all other Tentacles in Red Mode (JamSync).
- Consecutively, connect all Tentacles in Red Mode to the one Tentacle in Green Mode with the mini jack cable enclosed in the Set. Each Tentacle connected to the „master“ will change from Red into Green Mode. Now all Tentacles are in sync and flashing green simultaneously on the first frame.
Additional information:
You can use an external timecode source to define a master and then follow from step 2. To synchronize all your Tentacles to an external timecode.